English
中文简体
Español
Ningbo Changle Electric Appliance Co.,Ltd. is famous China High-Efficiency Electric Spin Dryers Manufacturers and Custom High-Efficiency Electric Spin Dryers Suppliers. The company was established in 2015 and located in Cixi, only 50kms from Ningbo port. It covers around 15000 square meters usable floor area, equipped with high-end producing and inspection devices. And our annual capacity is 200000 sets of washing machine and spin dryer. The products have been certified by CCC security certificate, CE/CB/SAA certificates, we have been exported to Japan, Australia, Korea, USA, Canada, UK, Middle-east etc. over 10 countries.
Focused Capacity for Optimal Water Removal
The capacity of our High-Efficiency Electric Spin Dryers is precisely calibrated around the weight of wet laundry and the need for dynamic balance during high-speed rotation. Unlike washing machine capacity (which measures dry clothes), spin dryer capacity is focused on how much wet weight the drum can safely handle while maintaining the stability necessary for high-velocity spinning. Our primary units, such as the 3kg mini spin dryer, are designed to handle 3kg up to 5kg of wet laundry effectively.
- Performance Measurement: The true measure of a spin dryer is its ability to reach high RPMs without excessive vibration. This requires a strong drum and a sophisticated suspension system. The capacity listed is the maximum weight that can be spun while maintaining the necessary balance for optimal water removal.
- Ideal Load Matching: The 3kg capacity is perfectly matched to the output of our portable washing machines (like the 2.5kg compact portable washing machine) and is also ideal for dividing the large wet loads from a standard full-sized washing machine into quick, manageable batches.
- Target Audience Deep Dive:
- Energy Savers: Homeowners who use a tumble dryer but want to significantly cut energy usage and runtime.
- Apartment Renters/Indoor Dryers: Essential for quickly removing water when line drying indoors to prevent damp smells, mold, and mildew.
- Delicates Owners: Those who wash delicate, expensive, or hand-wash-only garments (wool, cashmere) and need to remove water without heat or manual wringing.
- Small Commercial Operations: Businesses like small hotels, veterinary clinics, or gyms that require rapid turnaround of small towels and linens.
Crucially, the capacity is designed to prevent overloading, which is the only factor that compromises the high RPM performance. The powerful centrifugal force acts to push the water outward through the clothes and out of the drum vents. By focusing on a reliable 3-5kg capacity, we guarantee that the machine can maintain the necessary high RPM (often exceeding 2,500 RPM) to achieve a residual moisture content of under 50%—a level far superior to the 70-80% left by standard washing machine spin cycles. This precise capacity engineering ensures every user gets the maximum benefit of the high-speed extraction technology.
Optimizing Applications: Speed, Safety, and Savings
Our High-Efficiency Electric Spin Dryers are indispensable tools for several distinct applications, each focused on maximizing efficiency, protecting garments, and saving energy costs. They function as a powerful accelerator for the entire laundry process.
- Tumble Dryer Energy Reduction: This is the most significant financial application. By running wet clothes through the spin dryer for just 2-5 minutes before moving them to a conventional electric tumble dryer, you drastically reduce the moisture content. Since the tumble dryer's most energy-intensive task is evaporating water, our spin dryer handles this mechanically and electrically (low power draw) instead of thermally (high power draw), leading to massive savings.
- Accelerating Indoor and Outdoor Line Drying:
- Indoor Drying: In apartments or during rainy seasons, clothes dried indoors can take days and often develop mildew or a damp odor. The spin dryer removes so much water that garments are ready for line drying indoors, typically taking only a few hours. This is essential for hygiene and air quality.
- Outdoor Drying: Even with sunlight, removing heavy moisture is the bottleneck. The spin dryer ensures clothes dry rapidly, reducing exposure to environmental contaminants like dust and pollen.
- Gentle Care for Specialty Fabrics:
- Heat is the enemy of many delicate and expensive fabrics (e.g., silk, Lycra, performance synthetics). The spin dryer uses centrifugal force only, eliminating the need for heat and the damaging tumbling motion of a conventional dryer. This protects fabric elasticity, color vibrancy, and overall garment integrity.
- It’s perfect for hand-washed items that cannot be aggressively wrung out.
- Commercial Rapid Turnaround:
- For businesses requiring immediate laundry use (e.g., small clinics needing quick turnover of sanitized items, hair salons with towel service), the 2-minute spin cycle provides near-instant readiness for the next stage of use or drying.
The Process: The spin dryer is integrated between the washer and the final drying method. The user transfers wet, washed clothes (even dripping ones) directly into the spin dryer. After a short, powerful cycle, the clothes are removed, leaving a significant amount of extracted water in the machine's base, which is easily drained. This simple step—the mechanical removal of bulk water—is transformative, positioning the high-efficiency spin dryer as a crucial intermediary appliance for any energy-conscious or space-constrained laundry operation.
Unbeatable Performance: Speed, Safety, and Savings
Our High-Efficiency Electric Spin Dryers offer a powerful set of competitive advantages centered around performance, economy, and fabric preservation that cannot be matched by the spin cycles of standard washing machines. These are specialty tools designed for a singular, high-value function.
- Superior Water Removal Technology:
- Extremely High RPM: Our units operate at speeds often exceeding 2,500 RPM, achieving a centrifugal force significantly higher than the typical 800-1,400 RPM found in most washer-dryer combos. This results in residual moisture content below 50%, ensuring clothes are barely damp.
- Dedicated Mechanism: The spin dryer motor and drum are built purely for spinning stability, unlike a washer motor which must also handle agitation, leading to a compromise in spin performance.
- Massive Energy and Cost Savings:
- Low Power Consumption: The electric motor required for spinning only consumes a minimal amount of electricity (comparable to a ceiling fan) during its very short cycle (2-5 minutes). This is substantially lower than the power (and often gas) required for hours of heat evaporation in a tumble dryer.
- By reducing the need for tumble drying time, the spin dryer offers one of the highest returns on investment in energy savings among household appliances.
- Unmatched Speed and Turnaround Time:
- The entire cycle is typically complete in under 5 minutes. This immediate, rapid extraction means you can quickly process multiple batches of laundry, drastically reducing the total time spent on laundry day. This speed is invaluable in busy households or commercial settings.
- Garment Protection and Longevity:
- Because the machine operates without heat, there is zero risk of heat shrinkage or damage to delicate fabrics.
- The lack of tumbling agitation means clothes are subjected to less friction and wear, preserving the material integrity and shape over hundreds of washes.
- Enhanced Hygiene and Environment:
- Rapidly removing water prevents the development of the stale, 'mildewy' odor that often accompanies slow line drying indoors, promoting a cleaner, healthier living environment.
In summary, the high-efficiency spin dryer is the crucial link in the modern, energy-conscious laundry chain. It delivers an optimized, fast, and protective process that guarantees efficiency whether your next step is a clothesline or a high-tech tumble dryer. Our manufacturing expertise ensures that this high-velocity performance is delivered safely and reliably.
Intuitive and Safe: Simple Operation and Maintenance
Ease of use is paramount for a specialized appliance like an electric spin dryer. Our high-efficiency models are designed for straightforward, single-function operation, eliminating the complex programming found in multi-cycle washing machines. Safety and stability are integrated into every step of the user experience.
- Ultra-Simple Operation Sequence:
- Load: Open the lid and place the wet, washed clothes evenly around the stainless steel drum. Even loading is key to smooth operation.
- Secure: Close the lid firmly. Our units include a safety interlock or a highly secure closure mechanism.
- Start: Press the start button or turn the simple dial timer to the desired duration (usually 2-5 minutes).
- Finish: The machine automatically powers off when the timer expires. The user then opens the lid to remove the nearly-dry laundry.
- Integrated Safety Mechanisms:
- Lid Safety Cutoff: A crucial safety feature ensures that the motor will not operate, or will immediately cease spinning, if the lid is opened even slightly while the drum is rotating. This protects the user from high-speed contact.
- Automatic Braking: The drum is engineered to quickly decelerate once the power is cut, minimizing waiting time while maximizing safety.
- Stable Base: The unit features a wide, weighted base and high-quality rubber feet to ensure maximum stability and reduced walking, even during the highest RPM cycles.
- Simplified Installation and Placement:
- The machine only requires a standard electrical outlet (no special wiring) and a simple drain area (a floor drain, sink, or bucket) for the extracted water. It requires no fixed plumbing connections.
- Its compact, lightweight design means it can be moved easily, allowing for flexible placement in utility rooms, kitchens, or even on balconies.
- Minimal Maintenance Requirements:
- The smooth stainless steel drum is naturally resistant to grime and mold buildup.
- The only maintenance required is occasionally wiping down the exterior and emptying the extracted water from the collection base, if the model does not feature continuous drainage. There are no belts or complex filters to clean or replace regularly.
This single-purpose design focuses all its engineering on one critical goal: fast, safe, and efficient water removal. By maintaining this streamlined operational structure, we provide a high-performance appliance that anyone can use, regardless of prior experience with specialty laundry equipment.
